Tuesday, June 26, 2012

Felted pebble pouffe

Last Sunday I attended a workshop to make a pebble pouffe from felted wool. I have done some felting, but this was a whole new adventure. And a lot of work!
I will show you the pictures I took from the subsequent steps in the process. I will also tell you what could be done better next time round :-)

In short:
  • you felt a really large bag (felt it just enough to make the fabric feel a bit firmer, the fulling happens later in the process, when the pebbles are all in place!) 
  • make an opening on one side (about 10cms/4")
  • put in bricks made of foam rubber which are wrapped in a thin layer of wool; the wool being fixed lightly on the foam with a felting needle
  • tie the bricks from the outside of the bag with rope or rubber band
  • if you want, put some extra foam rubber in to make the pouffe a bit rounder in shape
  • close the bag (I used the you-and-me stitch so you can hardly see where the bag was closed)
  • throw the pouffe in the dryer for a period of time to really start the fulling process (mine was in for about 45 minutes)
  • rinse to get the soap out and use vinegar with the last rinse to eliminate any soap residue
  • squeeze out as much water as possible and leave the pouffe on a drying rack to drip out and dry up completely
  • be proud of the result!
Any further comments I will put with the corresponding picture.

I didn't measure the size of the bag, but it was approx 100x150cms (40x60"). Here you see the start, with one side of the bag laid out.

This is the "finished" bag with some of the bricks, ready to be put in.

The first bricks have been tied in the bag. I later on found out I left too much space between the bricks so next time I will do my best to tie them as close together as possible.

This is where I stopped for the day and started heading home. I continued the next day.

Throwing the pouffe around to start the fulling process.
By now you can see how much space there is between the pebbles, so, at that point, I decided to pull out the extra stuffing, hoping the pebbles would come closer together during the fulling process in the dryer.
Which they did!

In this picture you can see the ropes used to tie the bricks into pebbles.
You remove them at this stage.
The result after a hard day's work (or two...)

I did not intend to write a complete tutorial, this is just a description of the steps it took to make this felted pebble pouffe. For real tutorials on, for instance, how to felt a bag, you can always search the internet.


  1. That's very interesting! The pouffes are very comfortable to use for its soft and cozy materials and I'm glad to know about the processing of it. Thanks for an overview of its production system with snaps.

  2. You are very welcome! And thanks for your comment too. The pouffe is a lot of work, but the result is absolutely worth it.